Adheso-Graphics multi-density, high-recovery, PE foam mounting tapes.
Developed for wide web, flexible packaging print reproduction, and photopolymer or rubber printing plates of all thicknesses and types. Achieve maximum ink coverage on screen areas, minimize occurrences of dot gain or slur. Achieve optimal results when using proper impression settings on press.
Multi-layer reinforcement films for consistent thickness and lay-flat, easy-to-apply usage. Each tape has its own application range, depending upon graphics or material printed. Excellent, long-life reproduction, balanced compression, consistent thickness. EZ mount adhesion system simplifies plate mounting, improves reliability. Secure hold-down, easy-release cushions, virtually no adhesive transfer to the backside of the plate.
Spec Chart
| Product | Width | Nominal Thickness | Backing | Liner | Application |
| Flex ML20 Ultra-High Adhesion | 18” (457mm) 54” (1372mm) |
0.020” (0.51mm) | PE Foam Pink | Clear Pebble OPP Film |
MEDIUM LOW DENSITY For use with primary image high line screen, in combination with fine dot and solid type flexographic printing. |
| Flex ML15 High Adhesion |
18” (457mm) 54” (1372mm) |
0.015” (0.38mm) | PE Foam Pink | Clear Pebble OPP Film |
|
| Flex MD20T High Adhesion |
18” (457mm) 54” (1372mm) |
0.020” (0.51mm) | PE Foam White | T-Pattern OPP Film |
MEDIUM DENSITY Recommended for use in combination type printing, where process and solid ink coverage are reproduced as one image. |
| Flex MD20 Ultra-High Adhesion | 18” (457mm) 54” (1372mm) |
0.020” (0.51mm) | PE Foam White | Clear Pebble OPP Film |
|
| Flex MH20T High Adhesion | 18” (457mm) 54” (1372mm) |
0.020” (0.51mm) | PE Foam Green | T-Pattern OPP Film |
MEDIUM HIGH DENSITY Recommended for solid tone coverage, where primary image graphics are reproduced as solid coverage with minimal process enhancement. |
| Flex MH20 Ultra-High Adhesion | 18” (457mm) 54” (1372mm) |
0.020” (0.51mm) | PE Foam Green | Clear Pebble OPP Film |
|
| Flex HD20T High Adhesion |
18” (457mm) 54” (1372mm) |
0.020” (0.51mm) | PE Foam Blue | T-Pattern OPP Film |
HIGH DENSITY For use in dense tonal reproduction of solid image area, where absorbent substrates or maximum block ink coverage is required. |
